Specifications of GLOG series Load-Isolation Switch( rated current:63A-3150A ).
1.1) Service environment Application:
Altitude not more than 2000m. The range of ambient temperature is from 5℃ to 40℃. Relative humidity not more than 95%. The environment without any explosive medium. The environment without any rain or snow attacking. Note: If the product is expected to be used in the environment where temperature is over +40℃ or below -5℃~-45℃, users shall tell it to the manufacturer. The products are in conformity with GB/T14048.3-2008 Low-voltage switchgear and controlgear - Part 3: Switches disconnectors switch-disconnectors and fuse-combination units.
AC 50Hz, rated voltage 660V, DC rated voltage 440V, rated current 1600A. It is used for making and breaking circuit infrequently.
GLOG Loadisolation switch can be divided into 18 specs from 63A to 3150A, it is the basic type of module design, it has three poles and four poles (three poles + switch neutral pole), applied to make and break circuit or electric isolate, over 1000A is only for electric isolation.Symbol window on front face indicates the contact on-off state.
2.2)Mode of operation Direct operation: The handle is installed in the middle of switch directly. Operation outside the board:handle is installed outside the door of power distributing board.
If you need operation outside the board,then it is with extended shaft that is used for the operation outside the board.
2.3) It can be assembled two groups auxiliary contacts.